AC Repair
Technicians follow the same inspection sequence and documentation steps regardless of the site. This approach reduces the chance that a secondary problem is overlooked during the initial visit.
Get a quoteHVAC · the USA
Cobra HVAC handles HVAC work across the USA.
Each visit starts with a full look at the equipment, filters, and connections so nothing gets missed before any repair begins.
Parts are selected to fit the exact make and model already in place rather than using one-size fits all options.
Homeowners receive a written outline of findings and options before any work moves forward.
Services
Technicians follow the same inspection sequence and documentation steps regardless of the site. This approach reduces the chance that a secondary problem is overlooked during the initial visit.
Get a quoteEvery repair begins with model-specific documentation pulled from the manufacturer. Technicians record voltage and pressure readings at each stage so the next person who opens the panel sees exactly what was measured.
Get a quoteCobra HVAC focuses on accurate diagnosis during HVAC maintenance and clean installation of replacement parts so the system returns to reliable operation. Technicians carry common components to reduce the need for follow-up visits.
Get a quoteTechnicians record measurements on site and adjust the plan when field conditions differ from the original estimate. The same crew completes both removal and placement so questions about existing wiring or duct connections stay with people who have already seen them.
Get a quoteWe measure the home, review duct condition, and confirm equipment fit before any work begins. The same technician who performs the assessment usually returns for the heating system repair work and the installation so questions can be answered without repeating details.
Get a quoteEach visit follows a documented checklist that is reviewed before the technician leaves the site. Findings are recorded with measurements rather than general statements.
Get a quoteCobra HVAC maps each system on site rather than using a fixed checklist. Tools are selected to fit the duct sizes present, and collection equipment stays attached until readings show airflow has returned to the expected range for that equipment.
Get a quoteA unit that no longer lowers indoor temperatures usually points to low refrigerant, a failing compressor, or blocked airflow across the coils. The technician begins by checking the thermostat settings, then moves to the outdoor condenser for visible damage or debris buildup. Inside, the evaporator coil is inspected for frost or dirt that can stop heat transfer. Electrical connections are tested next because loose wires often cause the system to shut down on its own. Once the source is found, the needed AC repair is explained before any parts are ordered or installed.
Homeowners sometimes notice warm air from vents or short cycling on and off. These signs can come from a dirty air filter, a stuck reversing valve, or an aging capacitor that no longer holds a charge. A quick visual check of the filter and return vents can rule out simple airflow problems. The service call then focuses on pressure readings and electrical tests that show whether the issue sits in the motor, the control board, or the refrigerant line. This step-by-step approach keeps the diagnosis accurate and avoids replacing parts that are still working.
Our process
The call begins with a short description of the symptoms. Once on site the technician checks the system, explains the findings, completes the agreed work, and verifies that temperatures and airflow have returned to normal.
The process starts with a phone description of the symptoms so the right tools can be brought along. On site the technician confirms the model numbers and runs a series of checks that include voltage, temperature split, and drain line flow. If a part needs replacement, the old component is shown to the homeowner and the new one is installed only after agreement on the scope. The system is then restarted and retested to confirm the original problem has been addressed.
Not every repair requires the same level of work. A noisy blower motor may only need lubrication and a new belt, while a leaking condensate pan often calls for both a new pan and an added float switch. Older systems sometimes show multiple worn parts at once, so the technician lists each item with its condition and lets the owner choose the order of repairs. This keeps the job focused on what will restore reliable operation without unnecessary additions.
Pricing
The total depends on the size of the system, how difficult the equipment is to reach, and whether any parts need to be ordered. The numbers below are starting points only and are not quotes for a specific job.
AC Repair — starting at $185 Furnace Repair — starting at $195 Thermostat Replacement — starting at $145 Capacitor Replacement — starting at $125 Blower Motor Service — starting at $210 Refrigerant Leak Repair — $275-$450 Coil Cleaning — starting at $165 Drain Line Clearing — starting at $95 Igniter Replacement — starting at $155 Full System Inspection — starting at $110
Rental units often need repairs that keep the system running through the lease term without major upgrades. In these cases the focus stays on restoring basic function so the property stays comfortable for tenants. Older homes may have duct layouts or equipment locations that require extra time to reach, yet the same diagnostic steps still apply. Maintenance plans are offered for properties that want seasonal visits rather than waiting for a breakdown.
Clear access to the indoor and outdoor units helps the visit move smoothly. Homeowners can note which rooms feel warmer or cooler and whether the problem happens at certain times of day. Checking that the thermostat is set to the correct mode also prevents confusion during the first inspection. These simple steps let the technician spend more time on the equipment itself instead of locating switches or moving stored items.
FAQ
Short cycling often comes from an oversized system, a dirty filter that restricts airflow, or a failing thermostat that misreads room temperature. The technician checks the temperature split across the coils and reviews the recent run times logged by the control board. Once the cause is identified the repair focuses on restoring steady operation rather than masking the symptom.
The price depends on the location of the leak, whether access requires removing panels or moving ductwork, and how much refrigerant must be recovered and replaced. Small leaks in accessible lines are often less expensive than those inside the coil itself. A full diagnosis is needed before an accurate range can be given.
Most filters slide out from a marked compartment near the indoor unit and can be swapped without tools. If the system still runs poorly after a new filter is installed, the next step is a check of the blower wheel and evaporator coil for deeper buildup. A service call then confirms whether the issue is limited to airflow or something further in the refrigeration circuit.
Nearby
Coverage